Build Your Big Flow Tubeless Valve V2

Light Bicycle wheels feature different rim depths. To perfectly match the dimensions of our wheels, we offer various sets of tubeless valve stems. Available in 9 colors & 6 lengths, our new design tubeless valve stems are the essential components for cyclists seeking superior airflow, reliable sealing, and easy maintenance, adding a touch of custom bling to your ride.

Features

Aerospace Grade 7075 Aluminium

2-in-1 Valve Stem Caps with Valve Core Remover

Four-Slot, High-Flow System for Seamless Air & Sealant Flow

Instructions:

1. Firstly, remove the valve cap, locking nut, and o-ring from the valve stem.

2. Slot the rubber base down to the bottom of the valve stem.

3. Push the valve through the valve hole in the rim from the outside towards the center. Place the o-ring over the tip of the valve and slide it down until it sits on the rim.

4. Thread the locking nut onto the valve and tighten it against the o-ring and the rim.

5. Use a 4mm Allen Key in the base of the valve to hold it on the inside and push the base of the valve against the rim bed. At the same time, tighten the locking nut until it is hand-tight. It is okay if the o-ring is squeezed out slightly; this indicates an airtight seal. Do not overtighten the locking nut to avoid leaks.

6. Finish by screwing on your valve cap.

7. Use the valve core removal tool to remove the core and fill with no-puncture hassle tubeless sealant and inflate!